Ownership · 30 September 2026 · 2 min read
Setting an Automatic Watch the Right Way
By The Royalzman Atelier
An automatic watch rewards a little ceremony when you set it, and punishes carelessness in one specific way most owners never hear about. The good news is that doing it correctly takes only a few seconds and becomes second nature.
If the watch has stopped, start by winding it. Unscrew the crown if it is a screw-down type, then turn it clockwise around thirty to forty times to give the mainspring a healthy charge — do not rely on shaking the watch to wake it, which starts it on almost no power. You will feel gentle resistance; that is normal, and an automatic cannot be overwound.
Now the important part: the date danger zone. On most watches, a train of gears begins engaging the date mechanism around nine in the evening, builds tension through midnight when the date flips, and does not fully disengage until about three in the morning. If you use the quick-set date while those gears are meshed, you are forcing teeth that are already under load — and repeated often enough, that strips the date gears and means a trip to the watchmaker.
The fix is simple. Before you touch the quick-set date, move the hands to roughly six o'clock, well clear of that window. Set the date there safely, then set the correct time — and if the watch runs on a twenty-four-hour cycle you are unsure about, advance it past noon to confirm whether the date rolls at midnight or midday, so you land on the right one.
Finally, push the crown fully back in and, on a dive watch, screw it down until it seats. That last step restores the water resistance you bought the watch for. Winding, a safe date change away from the danger zone, time, and a sealed crown: four small habits that keep the movement healthy for decades.
More from the Journal