← The Journal

Horology · 3 October 2026 · 1 min read

Watches and Magnetism: The Invisible Enemy

By The Royalzman Atelier

If a mechanical watch suddenly starts running fast by minutes a day, the cause is usually not damage but magnetism — and the culprit is almost always something ordinary: a phone, a laptop lid, a handbag clasp, a speaker, a tablet cover.

The vulnerable part is the hairspring, a fine coil that breathes in and out to regulate the watch's beat. Magnetise it and its coils cling slightly to one another, shortening the effective spring and speeding the watch up. The effect is usually temporary and completely reversible — a watchmaker can demagnetise a movement in seconds — but while it lasts, accuracy is wrecked.

The long-standing defence is a Faraday cage: an inner case of soft iron surrounding the movement, which draws magnetic field lines into itself and diverts them around the delicate parts. Watches built this way have existed since the 1950s, created for engineers and scientists working near powerful electrical equipment. The benchmark standard, ISO 764, requires an antimagnetic watch to survive a field of about sixty gauss while keeping time to within thirty seconds a day — enough for ordinary life.

Everyday magnets have grown stronger since then, so makers have pushed far past that floor. Some movements now use silicon hairsprings, which are inherently non-magnetic, and the most resistant certified watches withstand fields of fifteen thousand gauss — vastly beyond anything a desk or kitchen will produce.

For the owner, the practical lesson is small: if your watch begins gaining noticeably, suspect magnetism before you suspect a fault, and keep a mechanical watch off the back of a tablet cover or a stereo speaker. A quick demagnetisation, and it returns to itself as if nothing happened.

More from the Journal

0%
Watches and Magnetism: The Invisible Enemy — Royalzman